Legacy products » HDP-3 » HDP Express » DEQX Mate » PDC-2.6 HD » PDC-2.6P HD PDC-2.6 HD Processor The DEQX Calibrated™ PDC-2.6 HD processor is a stereo digital processor offering DEQX’s patented speaker and room correction technology. When connected to a PC running DEQX’s software, the PDC allows you to measure and correct your main speakers and subwoofers using its largely automated Wizard driven measurement, analysis, and correction software.The processor only is intended to be used where a preamplifier or HT receiver/processor is already in use and DEQX is only required for speaker and/or room correction functions. When using any of the unit’s active crossover features, the unit would be connected directly in front of power amplifiers, being driven by the output of a preamplifier.Our loudspeaker’s introduce between ten to one hundred times more distortion, as well as errors in the form of inaccurate frequency-response and incoherent timing, than the signal that arrives to drive them. Unlike DSP room correction systems, whose measurements must contain room acoustic effects, the PDC first measures and corrects a speaker’s native (anechoic) behavior so that timing (phase and group-delay) errors and frequency-response errors can be compensated in detail before measuring and correcting room acoustics.The PDC can be used for correcting passive speakers, or if you have additional amplifiers available and are able to bypass your existing passive crossovers, its six analogue outputs provide up to 3-way active crossovers. Configurations supported are; passive speakers plus the option of one or two subwoofers, 2-way active speakers plus optional subwoofers, and 3-way active speakers.Stereo digital and analogue Inputs include: SPDIF (RCA), AES/EBU (XLR), unbalanced analog (RCA), balanced analogue (XLR). Standard outputs are analogue unbalanced (RCA). Optional outputs include balanced analogue (6 x XLR) OR Digital outputs (3 x XLR, 3 x RCA). Multiple PDC-2.6 units can used together for multi-channel configurations such as 4.2 and 5.1 to 7.7 configurations.The industry leading SHARC 32-bit floating point DSPs from Analogue Devices contribute only about 0.00001% distortion and noise. This new HD version of the PDC-2.6 processor contains improved power supplies and analogue electronics to preserve the system’s digital processing transparency as much as possible. FeaturesProvides DEQX Calibrated™ speaker correction for passive speakersAutomatically corrects phase and group-delay over typically 3ms windowProvides anechoic measurement and detailed display for speaker correctionProvides room-measurement/display (non-anechoic) for room correctionProvides DEQX-HD™ speaker correction for up to 3-way active speakersDEQX-HD™ active crossovers; 48dB/octave to 300dB/octave linear-phase32-bit, floating-point, 240-MFLOPS processing with dual SHARC DSPsAudiophile 24-bit 96kHz ADC-DSP-DAC processing and conversionFour, user-defined ‘Profiles’ allow different crossovers, room-EQ, preferencesCalibration Kit provides DEQX-calibrated measurement microphoneTwo stereo digital inputs: S/PDIF (1 x RCA) and AES/EBU (1 x XLR)Six analog outputs: unbalanced (6 x RCA)19” rack-mount kit option availableFree downloadable software and firmware updatesMembership of DEQX Users Group (online)Automatically corrects frequency-response typically to plus/minus 0.5dBIntegrate one or two subwoofers with main speakers with time-correctionPatented low-latency FIR processing for speaker correction allows video useAuto and real-time manual Parametric EQ over measurement displayIndividual driver correction prior to crossover when actively implementedTraditional active 3-way crossovers from 6dB/octave to 48dB/octaveAudiophile op-amps typically 300V/uSec slew-rate with high output driveFront-panel volume control and ‘Profile’ selectionDEQX integrated software measurement, correction and user-defined optionsTwo analog inputs: Unbalanced (2 x RCA) and Balanced (2 x XLR)Microphone input has 48V phantom power for DEQX Calibrated™ mics1U high chassis; 1.75" H x 17" W x 11.5" DOnline and telephone support90V-240VAC auto-sensing main voltage input; 30VA Calibration kits (option)A Calibration kit is used for setting up all DEQX units. Each includes the DEQX measurement, analysis and correction software for PC and USB cable as well as a DEQX Calibrated™ measurement microphone with cable.A boom microphone stand (not supplied) is required for speaker and room measurements. Stands are typically available for under $100 from a local musical instrument supply shop.For high-end speaker correction, the Reference calibration kit is recommended due to its high performance, higher bandwidth Earthworks microphone. Standard Calibration KitDEQX Calibrated™ Behringer measurement microphoneFive-metre balanced microphone cable (XLR)Five-metre USB cableDEQX-Cal™ PC-based measurement, correction software on CD Reference Calibration KitDEQX calibrated EARTHWORKS measurement microphoneFive-metre balanced microphone cable (XLR)Five-metre USB cableDEQX-Cal™ PC-based measurement, correction software on CD Optional output modulesThe PDC-2.6 HD can accept one optional output module. Balanced Out 'HD' ModuleProvides six electronically balanced XLR outputs. The ‘HD’ version uses CD servos to avoid the use of series capacitors, and uses late generation extremely high slew rate op-amps for an ‘open’ 3D sound with great resolution and unconstricted detail. Balanced Out Transformer ModuleProvides six transformer-balanced XLR outputs. This modules uses six Jensen output transformers that provide complete galvanic isolation from ground noise, while providing excellent transparency. Digital Out ModuleThe digital output module provides three stereo AES/EBU outputs via three XLR connectors. The unit also provides three stereo S/PDIF outputs via RCA connectors.It also provides a fourth female XLR that will accept an AES sync input that will asynchronously sync all digital outputs to the input clock reference up to 100kHz sample rate, regardless of the input or processing sample rate.