Compared to the PreMate, the PreMate Plus has a display/control touchscreen on the front panel, an Ethernet port for network audio streaming (Roon and DLNA), and 12V trigger outputs.
The PreMate Plus does not have the "High" output (used to drive tweeters in HD-Active systems) and has only a single digital output (the HDP-5 has four digital outputs).
In addition to the obvious advantage of extending bass response, the DEQX approach to subwoofer integration also highpasses the main speakers. This reduces cone excursion, thus reducing distortion and increasing resolution!
Yes! We can. In fact, we include it for free when you buy a DEQX. Be sure to book your first DEQXpert session soon after receiving your new DEQX to make sure you get the best out of it.
|Full scale input level||17 dBu / 5.5 Vrms||9.3 dBu / 2.25 Vrms*1|
|Input impedance||50 kΩ||50 kΩ|
|Full scale output level||17.4 dBu / 5.7 Vrms*1||10.8 dBu / 2.7 Vrms*1|
|Output impedance||600 Ω||75 Ω|
|Total harmonic distortion||0.0008%||0.0008%|
|TOSLINK (optical)||24-bit, 44.1 to 96 kHz|
|S/PDIF (BNC)||24-bit, 44.1 to 192 kHz, 75Ω|
|S/PDIF (RCA)||24-bit, 44.1 to 192 kHz|
|AES/EBU (XLR)||24-bit, 44.1 to 192 kHz, 110Ω|
|USB Audio||Asynchronous USB Audio Class 2, 24-bit, 44.1 to 192 kHz|
|S/PDIF (BNC)||24-bit, 96 kHz, 75Ω. (Follows signal on Main Speakers analog output,)|
|Amplitude correction||Better than 0.2 dB, typical (depends on measurement accuracy)|
|Group delay correction||0.5 ms, typical (depends on measurement accuracy)|
|Subwoofer crossover||From 6 Hz, 24 to 120 dB/octave*2|
|Processing latency||Typically 15 ms depending on filters, minimum 2.5 ms|
|Room EQ||Seven or ten bands, 1 Hz to 48 kHz, −300 to +40 dB, Q 0.01 to 17|
|Preference EQ||Three bands, 20 Hz to 20 kHz, gain to +/−9 dB, Q 0.5 to 10|
|DSP resolution||> 140 dB|